Automatic Chute Cleaning System

Specifically designed to clean the total vertical length of the internal surfaces of refuse chutes.  The system is factory fabricated as an integral unit ready for immediate on-site connection.

A cylindrical housing with nylon brushes is automatically lowered and raised by a geared electric motor.  The nylon brushes clean the internal surface as they move down and up the chute whilst a water and disinfectant solution is added from a top mounted flushing spray head. During the cleaning process the chute doors will be electrically locked.

The water supply for flushing the chute, the electric motor and the built in safety overloads are all individually controlled by a robust electric logic control unit contained in a remote control panel normally sited within the bin store.

Requirements:
15mm water supply connection.
380/415 volts, 50/60Hz, 3phase N+E, 15A fused isolator (located at bin store level)
(single phase version available, subject to specification)
Industrial grade disinfectant.

Motor
190W, 1600 RPM, continuously rated.

  

 

 

Manual Cleaning System

Designed like the automatic system to clean the total vertical length of the chute.

The cylindrical housing with nylon brushes in manually lowered and raised using a high geared manual winch mechanism which has a ratchet for operator safety.   The water supply to the disinfectant & sanitising unit is manually controlled by two valves, one to turn the water on or off and the other to control the water flow rate.

A manual system is only recommended on buildings up to 4 storey's high.

Requirements:
15mm water supply connection.
Industrial grade disinfectant.

Disinfectant & Sanitising Unit

Designed to give manual or automatic flushing of the internal surfaces of the chute, always used in conjunction with a cleaning system.

Fitted above the topmost entry section of the refuse chute as part of an automatic or manual cleaning system or on its own.

Simple to operate and maintain, a disinfectant & sanitising unit is recommended for use with every refuse chute installation as a means to help overcome strong odours.

Requirements:
15mm water supply connection.
220/240 volts, 50/60Hz 1-phase for stand alone automatic system.
Industrial grade disinfectant.

 

home page >